Grup Axelent telah berkembang menjadi grup perusahaan internasional dengan total tenaga kerja lebih dari 200 orang. Produk kami dijual di lebih dari 50 negara dan visi kami adalah untuk terus berkembang.
Axelent adalah perusahaan Swedia dengan pengalaman luas dalam pembuatan sistem dinding mesh dalam bentuk sistem proteksi dan partisi untuk industri, gudang dan konstruksi. Kecepatan, keamanan, layanan, dan solusi cerdas adalah semboyan yang menjadi ciri seluruh organisasi dan bisnis kami. Kami adalah pemimpin pasar dalam beberapa sektor dan produk kami terwakili di seluruh dunia.
Dibuat di Hillerstorp. Bekerja di seluruh dunia
Kantor pusat Axelent terletak di Hillerstorp, Swedia. Semua pengembangan produk, produksi, penyimpanan dan pengemasan dilakukan di sini. Produksi kami adalah otomatis tingkat tinggi untuk mengelola volume tinggi dan pengiriman cepat. Mesin kami dirancang khusus untuk memenuhi tuntutan efisiensi, kualitas, dan aliran cerdas kami yang tinggi. Karena semua produk standar kami tersedia, kami dapat mengirimkan pesanan Anda pada hari yang sama saat kami menerimanya.
Produksi yang efisien berarti pengiriman cepat
Produksi kami adalah otomatis tingkat tinggi untuk mengelola volume tinggi dan pengiriman cepat. Kami telah menciptakan fasilitas produksi yang benar-benar unik di mana kami telah menggabungkan mesin yang dikembangkan sendiri yang dikembangkan dengan Axelent Engineering dengan pengalaman dan pengetahuan pelindung mesin selama bertahun-tahun. Karena semua produk standar kami tersedia, kami dapat mengirimkan pesanan Anda pada hari yang sama saat kami menerimanya.
Kami memiliki model yang unik untuk pelanggan kami.
Apa itu keamanan? Kami di Axelent jauh lebih tertarik pada pengalaman Anda tentang kami daripada apa yang kami tulis tentang perusahaan kami dan produk serta layanan yang kami sediakan. Namun, kami telah mendengarkan dengan cermat apa yang benar-benar diinginkan pelanggan Anda dan sangat senang bahwa kesan keseluruhan Anda tentang Axelent adalah bahwa kami adalah pemasok yang berkualitas. Kecepatan, budaya perusahaan, dan pengetahuan kami harus memungkinkan kami untuk melayani Anda dengan cepat dengan solusi keamanan terbaik. Ini adalah dasar dari model bisnis kami yang 'sederhana' namun unik, model yang telah menjadikan Axelent salah satu merek terkemuka di industri.
Alamat:
Kävsjövägen 17SE-335 73 Hillerstorp
Sweden
Tel. +46 370 37 37 30
Website: https://www.axelent.com
MACHINE GUARDING
X-Guard adalah pelindung mesin nomor satu yang memenuhi permintaan Machinery Directive tentang pelindung permanen mulai tanggal 29 Desember 2009. Dengan berbagai macam komponen dan aksesori standar, X-Guard dijamin untuk memenuhi semua kemungkinan kebutuhan pelindung mesin. Kami juga dapat menawarkan X-Guard Contour, yang merupakan pelindung mesin pertama di pasar dengan sudut bundar.
Aman
Pelindung mesin Axelent dirancang untuk memenuhi semua tuntutan yang dikenakan pada pelindung mesin fungsional. Fungsional dan cerdas. Selain keamanan, sangat penting bahwa produk kami bekerja semulus mungkin. Pelindung mesin kami memiliki banyak solusi cerdas untuk memfasilitasi aliran di dalam dan di sekitar alat berat yang memerlukan jenis perlindungan ini.
Sederhana
Pelindung mesin kami dibuat dengan desain standar untuk panel, tiang, aksesori, dan warna. Hal ini memudahkan Anda untuk melengkapi penjaga yang ada jika diperlukan.
Menyelesaikan
Pelindung mesin X-Guard tersedia di bagian panel jala atau pelat lembaran dan bagian plastik (lihat Teknis X-Guard hlm. 4-7). Banyak pilihan pintu, kunci, dan aksesori Axelent menawarkan solusi pelindung mesin lengkap yang disesuaikan dengan kebutuhan Anda.
Hemat Biaya
Penanganan yang mulus dan mudah, bersama dengan pengiriman dan perakitan yang cepat, selalu memberi Anda penghematan keseluruhan yang baik saat memilih pelindung mesin Axelent.
X-Guard and X-Tray is the perfect combination of machine guarding and a cable routing system. X-Tray for X-Guard can be completely integrated with our machine guard, which makes Axelent unique on the market. The black wire trays and smart fittings gives an integrated and sleek design.
X-Tray cable trays fit X-Guard machine guard like a glove. Together they provide the optimal solution. X-Tray cable trays are strong, adaptable and easy to fit. They enable elegant solutions with no special tools required. As with X-Guard, only a few brackets and tools are needed. The combination of X-Tray and X-Guard gives you maximum use of minimum material. A simple but smart touch. The near endless possibilities, despite fewer components, saves you time and money through having everything in one order to complete projects.
The perfect fit Axelent’s X-Tray is the ideal cable tray for X-Guard machine guard because they are perfectly matched for smooth installation to give a professional touch. No special tools required The combination is easy to assemble without the need for special tools. A 13 mm spanner is all you require. One supplier A turnkey solution from one supplier makes project implementation that much quicker and easier. It is also cost-effective because everything is bundled in the same shipment.
WAREHOUSE
The X-Store systems are designed to give you easy and secure access to your warehouse. The second generation offers a number of benefits and improvements. This includes a dedicated seiling solution, easy independent removal of adjacent panels and a single post that can used in three different directions – including corners!
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- New fast and unique way to attach panels to posts
- Wide range of locks and doors (based on the same system that is used for for X-Guard)
- Remove a panel without affecting the adjacent panels Build right up to the ceiling Available in Snapper
- Works Modular concept – custom height and width
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
SafeStore is the ultimate solution for safe, tidy and easy storage. By attaching SafeStore onto shelf store, a pallet or goods can be prevented from falling down and causing injuries or damage. Today SafeStore is used in all types of warehouses from the small manually operated warehouse to the fully automated crane warehouse.
The SafeStore system is based on six standard sections that can be adapted to almost all modern shelf systems. The sections are attached with brackets to the shelf posts and then bolted to each other to the required width and height. Two different types of guard openings enable you to combine safety and economy. You can also cut the guard for optimal fit. Everything is delivered plastic-wrapped on our special pallets straight from Hillerstorp, Sweden.
X-Rail fall protection system can be used as an edge protection for mezzanine floors. The system is a modification of our X-Guard range and therefore the system can fill dual purposes, mezzanine protection and machine guarding. X-Rail can be used either without panels or with X-Guard Classic panels – mesh, plastic, and sheet metal.
X-Rail comes in two post heights; 1 400 and 2 300 mm, and can be installed in a number of different heights and center widths allowing you to choose your preferred configuration.
The system is completely interchangeable with standard X-Guard in areas where edge protection is not required. X-Rail is quickly and easily installed either directly on a concrete floor, bolted to the steel mezzanine I-beams of the mezzanine structure or on several different bases, including 38 mm plywood or metal grid channels.
The installation of the modular handrail is also easy, the existing key hole slots in the rails allow to use a handrail and additional kneerail, if needed. To ensure that maximum safety is achieved you also may also install mesh, solid or transparent panels depending on the nature of the installation and the requirements. Using a full mesh panel and the kick plate, you avoid gaps and thereby prevent accidents with smaller objects falling to lower levels.
ShelfStore is practical and very stable mesh shelving that is suitable for non-pallet small items as well as for pallet storage. Mesh shelving does not gather dust and lets light and water seep through, usually a requirement when a sprinkler system is installed.
All parts of ShelfStore are designed to make handling as safe and easy as possible. One example is that mesh shelving has deep, overlying wires which makes taking goods in and out easy. The L-shaped front section also ensures that the shelving sits securely in the shelves without them needing to be bolted in place, a feature which also makes changing or converting your warehouse or storage area easier. ShelfStore can be supplied in a number of sizes. The mesh shelving is supplied on shrink-wrap plastic covered pallets.
IMPACT AND SAFETY
A new way of preventing damage in industrial environments How often have you experienced the following? A forklift goes astray and is stopped by a steel bollard, safety rail or bracket. Unfortunately, the collision damages the steel bollard. As well as the concrete floor, the forklift and the goods. Moreover, the operator is injured. Surely things don’t have to be like this? Imagine if you could replace those heavy-duty collision guards with a set of solutions designed to absorb impacts and avert collisions while also reducing your maintenance costs? Well, these solutions already exist. And they’re available at Axelent’s Impact Protection.
CABLE ROUTING
X-Tray are developed for a smart, fast and easy installation. The cable routing system is a premium brand and complies with the highest demands on cable routing systems according to IEC 61537.
X-Tray system is simple and flexible to use and the longest spacing between support brackets on the market gives you a cost-effective solution with regard to the number of parts and their installation. We can give you the best visual presentation and the fastest quote. X-Tray is about reducing the costs. Fewer supports and fewer parts bring down the overall cost.
With X-Rack U-Bars and a few accessories you can create data racks according to your specifications. You can mount your equipment in the front, back or in center of the rack. The depth and height of the rack is determined by the length of the U-Bars. X-Rack comes in several standard sizes, but can also be cut or ordered to the required size.
All the parts are ordered separately, making it easier to adapt to your needs and quick and easy to transport and assemble in just a few minutes. Preassembled racks are also available on request. Customer-specific product kits can also be made to simplify future ordering and installation. One advantage with this is that the wire trays can be fitted directly on X-Rack without the need for brackets and pendants. We also have accessories like radius limiters and cable trays that allow cables to be installed neatly, safely and easily.