Faccin S.p.A. is one of the world leaders in the design, manufacturing and sale of plate and angle rolls, dished heads machinery and special machines.
Faccin concentrates its production in Visano, in the Brescia province. The Faccin facility covers over an area of 60,000m², of which 1,250m² is occupied by offices and 15.000m² by the production facilities. Using the latest technology, the company follows the construction of machinery at every stage, from receipt of the order to design by the in-house engineering department, from construction of electro-welded structures to machining of structures and forged rolls up to assembly and shipping.
Through an extensive network of subsidiaries, Faccin provides thorough sales and after-sales service worldwide.
Address:
Via dell’Industria 19
25010 Visano
Brescia – Italy
Tel: +39 030 99 58 735
Fax: +39 030 99 58 771
Website: http://www.faccin.com
ANGLE/SECTION ROLLS
Faccin Srl designs, manufactures and supplies a range of profile bending machines designed to support extreme rolling performance. Faccin’s angle rolls are technologically advanced, reliable and precise machines able to assure excellent bending quality and maximum productivity over time. Faccin’s roll bending machines are suitable for bending steel, stainless steel and aluminium profiles and beams of various shapes and sizes.
The double pinch angle rolls of the RCMI series by Faccin are precise and reliable profile bending machines, designed and constructed to assure high bending performance. The solid steel structure of certified quality and the special, very high strength forged steel modular rolls make every model in the RCMI range the ideal angle rolls for bending profiles with high flexion strength modulus. RCMI is able to operate on all standard profiles, including beams and curved ducts in the direction of greater inertia.
The variable geometry angle rolls of the Taurus series offer excellent rolling quality, versatility in bending steel and aluminium profiles and maximum productivity. The special design with variable geometry and 3 motorized rolls assures maximized precision in bending small profiles and at the same time, excellent ability to bend large and high resistance modulus profiles. Taurus series machines are ideal for heavy metal fabrication work up to 17,000 cm3 (1,000 in3) capacity.
Section roll 4R is a section roll machine with 4 rolls. The workpiece will be clamped by the top and bottom rolls, providing a very short flat-end at the time of pre-bending.
- The workpiece is always pinched, minimal risk of slipping
- Hydraulic roll dial with speed controller
- Hydraulically powered bottom roll drive
- Standard roll for flat bar, angle steel, T steel and square bar
Section roll R adalah mesin section roll yang dapat disesuaikan untuk menangani berbagai proses rolling. Kedua roll samping dapat digerakan secara hidraulik dan terpisah.
- Drive pada 3 roll, minimal risiko benda kerja tergelincir
- Guide roll dengan 3 axis
- Roll standar untuk flat bar, baja siku, baja T, dan batang persegi
- Dapat dilengkapi dengan control CNC
DISHED HEAD LINE
Manufacturers of dished heads for tanks and pressure vessels require machines able to assure high performance and high productivity. Faccin offers dished heads production lines that include technologically advanced presses, flanging machines and manipulators, designed to offer maximum reliability and to meet the needs of manufacturers of dished heads in terms of achieving tolerances and lamination reduction.
Faccin offers a range of PPM hydraulic presses with an exclusive design with rods. These double column presses feature the exclusive HPT system that minimises deformation of the frame and thus assures forming accuracy and high reliability. To accurately position the plates under the dished head press dies in the PPM series, Faccin offers the automatic manipulators in the MA range. These handling systems allow you to process several plates at the same time, reducing production time and assuring high quality.
The flanging machines of Faccin’s BF series are dished head machines capable of guaranteeing high productivity, assuring maximum quality of the final product with cost optimization. BF flanging machines are built with C-shaped electro-welded structures and equipped with forming and flanging rolls in forged alloy steel: this guarantees the maximum machine reliability and long service life. Faccin’s BF range of flanging machines are available for dished heads with or without central hole and for thickness up to 45 mm (1¾”).
The hydroforming machines of Faccin’s PPH series offer high productivity and maximum reliability in forming plates up to 8 mm (5/16”) thick. These machines for dished heads are widely used in the production of truck tanks as they allow for hydroforming dished heads in various shapes including oval and polycentric. Thanks to numerical control included in the supply, Faccin’s PPH water presses assure complete automation of the production process; the optional loading/unloading systems, however, allow production time to be reduced without sacrificing the high quality of the finished product.
RIBO adalah mesin flanging dengan design yang mengutamakan kemudahan pengoperasian dan produktivitas tinggi. Mesin ini tersedia dengan kapasitas mulai dari 2 mm hinggga 80 mm, dan pembentukan panas hingga 200 mm.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- ASME 2:1 kepala elips hingga diameter 8000 mm
- Dirancang untuk produksi kerucut
- Diameter maksimum 12.000 mm pada sumbu horizontal atau Panjang hingga 7.000 dalam posisi miring
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
PAO adalah mesin hydraulic press yang dapat memproduksi dished head dengan berbagai ukuran. Tonase berkisar dari 150 hingga 5.000 ton dan dapat dilengkapi dengan manipulator untuk memutar dished head secara otomatis.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- Dished heads hingga diameter 11.000 mm dan ketebalan lebih dari 100 mm
- Sistem pemutaran otomatis dan inovatif
- Bisa digunakan untuk membuat segment dari spherical tank (tangka bulat)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
PLATE BENDING ROLLS
Faccin offers the widest range of bending machines available on the international market. Faccin bending rolls, suitable for bending plates in a variety of thicknesses, are technologically advanced products capable of bending varyingly thin or thick plates offering maximum precision, high productivity and long term reliability with the aim to best satisfy every application requirement, Faccin produces and sells various types of plate bending machines.
Reliability, rolling power and cost-effectiveness: ASI is the initial pinch 3-roll bending roll model designed for high quality cylinder rolling. Thanks to asymmetric geometry in moving rolls, ASI delivers a superior level of rolling. Durable construction for maximum safety, self-supporting frame for placement on any surface. ASI is ideal to bend plates of thickness between 1 and 9 mm and width between 1000 and 3000 mm (40” – 120”).
Productivity, speed and precision: HCU is an innovative design 2 roll bending roll model, made with a special polyurethane roll and designed to roll thin plates with high productivity. The HCU series includes bending rolls with automation for an average rolling of 180 pieces per hour, reaching a peak of over 300 pieces per hour in special versions. HCU is ideal to roll plates between 500 and 2000 mm (20” – 80”) long with thickness from 0.2 to 5 mm (.008” – .197”), achieving bending diameters of even less than 80 mm (3”).
The latest evolution of the traditional bending roll, 3HEL is the most precise, sturdy and versatile electronic pyramidal 3-roll bending roll in its class. This 3-roll double pinch bending roll is designed and built by Faccin for meeting the needs of metal fabrication. The 3HEL series includes linear guide bending rolls for processing plates with width between 1500 and 4000 mm (60” – 156”) and thickness between 3 and 30 mm (1/8” – 1-3/16”). Reliability at low cost and ease of use.
Maximum innovation in plate bending technology: the 4HEL model is the most versatile, accurate and simple to use 4-roll pyramidal electronic bending roll. The most powerful machine amongst CNC linear straight guide bending rolls, assuring high productivity with tripled speed compared to traditional pyramidal bending rolls. The 4HEL series is designed to bend plates with width between 1500 and 18000 mm (5 ft – 60 ft) and cold from 5 to 150 mm (3/16” – 6”), and is used for producing cisterns, pressure vessels and wind towers.
Recognised worldwide as the most advanced and powerful model of electronic 3-roll bending roll, HAV combines rolling power and maximum pre-bending precision, assuring very high performance in less time. The special variable geometry configuration makes HAV 3-roll bending rolls suited to medium-heavy and heavy rolling processes for plates with thickness up to 300 mm, such as production of pressure vessels, offshore platforms, reactors, heat exchangers.
SPECIAL MACHINE
Faccin’s portal presses of the PPS line are universal and versatile machines to meet multiple needs of shipbuilding operators such as forming plates and profiles, levelling, bending, rolling and 3D modelling. Available in capacities from 150 tonnes to over 5000 tonnes and width from 2 to 10 m (6’ – 32’), the PPS can be equipped with a wide range of dies for special processing.
The angle rolls of the FB series are machines used in the shipbuilding sector as benders for bulbous bows and profile benders of various types. Unique machines on the market, featuring an innovative guide system that allows the profile to be bent in both directions. Faccin’s FB angle rolls are CNC machines able to assure full automation of the production process.
The long 3-roll bending rolls of the HAV-2P range are designed to support production of pipes over 18 m (60’) long and bending plates up to 45 m (1¾”) thick. Productivity, repeatability and automation of the entire process make HAV-2P bending rolls special machines with great potential, able to offer high performances for a final product of excellent quality.
Faccin’s RP line includes large-sized bending rolls designed to bend plates even wider than 20 m (above 65’). The machines of the range effectively combine the production rate of a bending press with the versatility of a press brake. The solid oversized structure and three tilting rolls with independent movement assure versatility, efficiency and reliability of RP bending rolls.